Complete program available at short notice and always from reputable manufacturers.
Our range of carbon and stainless spring steel in sheet, slit strip, flat bar and wire in 1.4034 (AISI 420), 1.4301 (AISI 304), 1.4310 (AISI 301), 1.4828 (AISI 309), 1.0535 (AISI 1055), 1.0601 (AISI 1060), 1.0603 (AISI 1070), 1.0605 (AISI 1074), 1.1203 (AISI 1055), 1.1204 (AISI 1055), 1.1211 (AISI 1060), 1.1231 (AISI 1070), 1.1248 (AISI 1078), 1.1269 (AISI 1086), 1.1274 (AISI 1095), 2067 AISI 52100), 1.5024 (AISI 9250), 1.5025 (AISI 9255), 1.5026 (AISI 9255), 1.5027 (AISI 9260), 1.5028 (AISI 9260) gives an impression of the possibilities of GNS Nederland. Our program of spring steel is both wide and deep and given the enormous diversity of dimensions is only mention of deliverable qualities and thicknesses. Sheet, slit strip, flat bar and wire in a.o. X46Cr13 (1.4034), X5CrNi18-10 (1.4301), X10CrNi18-8 (1.4310), CrAl20-5 (1.4767), X15CrNiSi25-4 (1.4821), X15CrNiSi20-12 (1.4828), C55S (1.1204), C60S (1.1211), C90S (1.1217), C67S (1.1231), C75S (1.1248), C85S (1.1269), C100S (1.1274), 75Cr1 (1.2003), 1.2235, 102Cr6 (1.2067), 48Si7 (1.5022), 38Si7 (1.5023), 46Si7 (1.5024), 51Si7 (1.5025), 55Si7 / 56Si7 (1.5026), 60Si7 (1.5027), 65Si7 (1.5028), 75Ni8 (1.5634), 51CrV4 (1.8159) always comes from reputable producers where no concessions are made to quality.
Available from stock in thicknesses of 0,02 to 3 mm and in widths up to 400 mm in soft, hard, pickeled or polished version. Various tensile strengths from soft (Rm 500-750 N/mm²) to spring hard (Rm 1100-2100 N/mm²). If desired, we also take care of the laser cutting for you.
Available from stock from 0,02 mm thickness and in widths up to 400 mm untreated, annealed or tempered condition. Various tensile strengths from unhardened (Rm 450-600 N/mm²) to hardened (Rm 1100-2100 N/mm²). If desired, we also take care of the laser cutting for you.
We gladly inform you about the materials and/or qualities you are searching for. If you don’t find in the pdf what you are looking for does not mean that we have to pass. Let us know what you need. Leave your questions and we’ll inform you about the possibilities.
The products are available in EN, DIN and ASME / ANSI qualities and in many cases with certificates according to EN10204, additional PMI tests etc. As part of our commitment to error-free deliveries, all our products are inspected one by one before being packed and shipped. We do that with our own transport with our own drivers or with reputable parcel services where you are kept informed of the status of the shipment.
Are you curious about the possibilities? Do not hesitate to approach us. We are happy to help and would like to think along with you about your material needs. Our possibilities will surprise you.
Do you have any questions?
Send us an email by clicking on the link below or fill in the contact form.
Of course you can always call us!
Geen verkoop aan particulieren